ROHDE & SCHWARZ FSH3.03 REPAIR and ROHDE & SCHWARZ FSH3.03 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ROHDE & SCHWARZ FSH3.03. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSH3.03 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSH3.03 (1145.5850.03)   Description / Specification:    
ROHDE & SCHWARZ FSH3.03 3 GHz Handheld Spectrum Analyzer w/ Preamplifier

The R&S FSH3.03 (1145.5850.03) 3 GHz Handheld Spectrum Analyzer is ideal for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service – an extensive range of applications. The R&S FSH3.03 comes with an adjustable preamplifier, making it suitable for measuring very small signals. By means of the TDMA POWER function, the FSH3 performs time-domain power measurements within a timeslot of TDMA (time division multiple access) methods. Specifications. Frequency range: 100 kHz to 3 GHz. Resolution: 1 Hz. Counter accuracy: S/N > 25 dB ± (frequency × reference frequency error). Resolution bandwidths: 100 Hz to 1 MHz. Video bandwidths: 10 Hz to 1 MHz. Displayed average noise level: typ. –135 dBm (100 Hz). TOI: typ. 13 dBm. SSB phase noise: <–100 dBc (1 Hz) at 100 kHz from carrier. Detectors: sample, max/min peak, auto peak, RMS. Level measurement uncertainty: <1.5 dB, typ. 0.5 dB. Reference level: –80 dBm to +20 dBm. Interfaces: RS-232-C optical interface. Options. FSH-B1 (1145.5750.02), Distance-to-Fault Measurement. FSH-K1 (1157.3458.02), Remote Control via RS-232-C. FSH-K2 (1157.3387.02), Vector Transmission and Reflection Measurements. FSH-K3 1157.3429.02), Receiver Mode.



 

Standard Calibration $605.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSH3.03. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your ROHDE & SCHWARZ FSH3.03 REPAIR and/or ROHDE & SCHWARZ FSH3.03 3 GHz Handheld Spectrum Analyzer w/ Preamplifier CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: